Robotic Vacuum Cleaner R530 Instruction Manual
Important Safety Instructions • Before using this device, pick up objects like clothing and loose paper. Lift up cords for blinds or curtains, and move power cords and fragile objects out of the way. If this device passes over a power cord and drags it, an object could be pulled off a table or shelf. • If the room to be cleaned has a balcony, a physical barrier should be used to prevent access to the balcony and to ensure safe operation. • Do not place anything on top of this device.
Product Composition / Package Contents 4 Product Composition / Part Name 5 Icons Display Function 6 Dust Box, Water Tank and Charging Dock 7 Product Usage / Preparation 8 Product Use/ Robot Charging 9 Product Use / Turn On / Turn Off 10 Product Use / Start Pause, Wake up 10 Product Usage / Select a Cleaning Mode 11 Time Scheduling Setting 12 Mopping / Water Tank 13 Cleaning and Maintenance 14 Troubleshooting 19 Product Parameter 20 2
Robot Charging Dock Power Adapter Cleaning Brush Dust Box Instruction Manual Side Brush x4 HEPA Filter x2 Water Tank 3
Laser sensor Edge cleaning key Top Cover Start/Pause key Return chargingkey Dust Box / WaterTank Omnidirectional lens Charging Contact Pins Drop Sensor Magnetic Sensor Side Brush Omnidirectional Wheel Battery Compartment Drive Wheel Rolling Brush Brush Guard Dust Box Dust Box 04
1 use mobile phone to scan the QR code to download APP APP IOS: Use iPhone “APP store”search "SWEAFT" to downloadthe APP Andriod: Use Andriod phone “Market” search “SWEAFT” to download the APP Andriod phone iPhone screenshot screenshot 5
2 APP usage guide iOS / Andriod smart phone: 1. Login APP, or register as new user in the first time of use. Please fill up necessary information in APP registration in order to access the APP 2.
3 APP connects to Robot operation guide Switch on Robot, then press and hold the “Return”or “Home” button for 3 sec after a “Ding” sound, Robot will have a voice message of “Smart link”. Then, the Wi-Fi icon will flash and ready for Wi-Fi connection.
Select P8 Model Select network to connect Attention: 1.
4 Successful connected to Wi-Fi, press name of the Robot, “LDS” as below, enter to APP operation 5 After connection established, APP interface guide Forbidden cleaning setting Selected cleaning area Charging mode Selected area cleaning mode Spot cleaning mode Planned cleaning mode 9
APP Display Function: Function Description Button Function Mode Edge cleaning mode: icon always light up, start cleaning; icon flashing, cleaning pause Auto cleaning mode: icon always light up, start auto cleaning; icon flashing, cleaning pause Single room mode: icon always light up, start single room cleaning; icon flashing, cleaning pause Power button Section cleaning: user able to create cleaning area in the map available in APP. Robot will start cleaning after area set.
Dust Box, Water Tank and Charging Dock High Efficiency Strainer Primary Filter Strainer Dust Box Metal Sheet High Efficiency Top Cover Vent Dust Box Swivel Cover Water inflow hole Water Tank Mopping cloth Signal sensor W DC socket DC socket 11
12
Product Usage / Robot Charging Place the Charging Dock on a hard, level surface and against a wall. Remove objects within 1.5 ft/0.5 m on both sides and within 3 ft/1 m in front of the Charging Dock. C W C D N L 5 Robot returns to the Charging Dock at the end of a cleaning cycle or when its battery is running low Plug the adapter into the a wall outlet and plug the DC jack into the DC socket of the Charging Dock.
Product Use / Turn On and Turn Off on the Robot until the indicator Press the Robot light on the robot turns on and the “Welcome to use sweeping robot prompt tone. Press the robot turns off. T 2. Press cleaning on the Remote Handset to stop on the Robot until the indicator light on Turn off the Robot if it will not be used for a long period of time. To preserve the battery’s lifespan,recharge at least once every 6 months. 3.
Product Use / Select a Cleaning Mode 1. Auto Cleaning Robot optimizes its cleaning path by selecting different cleaning modes automatically until cleaning is complete. This is the most commonly used cleaning mode. Press on the Robot or start cleaning in Auto Mode / H on the Remote Handset to D T - Robot will return to the Charging Baseautomatically when the battery level becomes low or when Robot is finished cleaning. - By default, Robot starts in Auto Cleaning mode when it is turned on.
Product Use / Select a Cleaning Mode 6. T -Make sure the time is set correctly to your local time before setting a scheduled cleaning.
Mopping / Water Tank Do not use mopping function with any carpet floor Please remove mopping cloth and clean it after mopping is completed. Please empty the water tank after each use.
Cleaning and Maintenance B x D Robot Part Cleaning Frequency Replacement Frequency Filters Once every week Every 2 months Rolling Brush Once every week Every 6-12 months Side Brushes Once every month Every 3-6 months (or when visibly worn) Brush Guard Once every month Every 3-6 months (or when the silicone rubber strip on the brush guard becomes visibly worn) Sensors Once every month Charging Pins Once every month Swivel Wheel Once every month x D D 18 x x
Cleaning and Maintenance T -It is recommended to clean the primary strainer with water every 15 - 30 days after been used. The use life of the high efficiency filter screen is 3 months. 1. Before installing the filter screen, please ensure that the high efficiency filter screen and the primary filter screen are dry. 2. Do not expose the high efficiency strainer and primary strainer into the sun.
Cleaning and Maintenance Water Tank and mopping cloth care W W 4U 5D W W v 20
1 2 3 4 5 1 2 4 5 3 T 21 Only use the side brushes when completely dried.
please use dry dishcloth for cleaning, and do not use wet dishcloth to prevent damage caused by water.
Troubleshooting No. Prompt Tone Cause of Failure Solution 1 Wheels off the ground Robot suspended Please put the Robot back to the ground and press the cleaning key again. 2 Dust Box not installed Dust box removed and not installed Return the dust box to the Robot and press the cleaning key again. 3 Battery failure Abnormal battery charging Contact our customer service department to test battery.
Classification Structural class Battery parameter Projects Parameter Diameter 330 mm / 1.08 ft Height Net 74mm / 0.25 ft weight 2.7 kg / 5.94 lbs Voltage 14.8 volts Battery 3000 mAh rechargeable lithium battery pack Dust box capacity 600 ml Charging type Automatic charging / Manual charging Cleaning mode Auto / Single Room / Edge / Spot / Mopping Primary charging time About 300 minutes Working time About 150 minutes Rated power (w) 28w Operating voltage ( v ) 14.
Component Pb/Pb compound Hg/Hg compound Harmful Substance Cd/Cd compound Cr(VI)Cr(VI) compound PBB Plastic Hardware Host circuit module Electronic Battery Plug power cord (Metal part) Description: This form is prepared in accordance with the provisions of SJ/T 11364. : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in the current valid version of GB/T26572.
WARNING 1、This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
FCC ID：2AT7JR530 FCC Radiation Exposure Statement: The transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. FCC Warning This device complies with Part 15 of the FCC Rules.
