User Manual

11
Notes：
If the robot is in wait-to-connect state for more than 2 minutes, the Wi-Fi
function will automatically close. To reconnect the robot to your mobile
phone, please reset the Wi-Fi settings.
!
Notes：
If the robot can not find the self-empty station, it will back to the
starting point automatically. Please put the robot back in the self-empty
station manually.
Auto mode： The robot will automatically back to the self-empty
station for charging after cleaning is finished.
Manual mode: Press button to start recharging during pause
state.
The power indicator light blinks in breathing manner while charging.
Charging
Notes：
If no operation is performed beyond 10 minutes, the robot automatically enters
the sleep mode.
Put the robot back to charge on the self-empty station in a fault state, the
cleaning will end.
If the robot encounters a fault while working, the power indica-
tor blinks quickly in red, and a voice prompt is generated.
Fault State
If your mobile phone fails to connect to the robot due to reasons
such as change of router settings, forgetting of password or
some other reasons, please enter the Wi-Fi configuration mode
on your mobile phone according to the network connection
instructions
Reset Wi-Fi
!
!
Notes:
If you start partial cleaning when the robot is in pause state, the current
cleaning task will be stopped.
You can specify a target point on the APP map, the robot will
automatically plan a route to the point. If you use this function
when the robot is in standby or pause state, the robot will clean
a 1.6*1.6 square meters zone which centered by the robot. After
cleaning, the vacuum cleaner will automatically return to the
starting point and stop working.
Clean a pointed zone
!
1.6M
1.6M