User Manual

Product usage/use instruction
10
Long press key to power on the robot, power indicator light on
and robot enters into standby mode. When the robot in quiescent
state, long press key to power off the robot, then the cleaning
ends.
Notes：The robot can not power off while charging.
The robot can not start cleaning if the battery is too low. Please start cleaning after
charging.
Please tidy up all kinds of cables(including the power cable of the self-empty station)
on the ground before cleaning, otherwise, the robot may drag the cables and lead to
the power off of other home appliances or damaged items or cables.
If the cleaning zone is less than 4 square meters, the robot will clean twice by default.
Resume cleaning: If the battery is insufficient during cleaning, the robot will back to
the self-empty station for recharging and automatically resume to the interrupted
place to continue cleaning after being fully charged. (This function can be opened or
closed on APP)
Pause
While working, you can press to pause the robot if the water
tank needs to add water or clean the mop. Press the key to
continue cleaning, or press key back to the self-empty
station and ends the cleaning.
Notes:
Notes:
If the robot is put back to the self-empty station in a pause state, the
cleaning will end.
Sleep Mode
If no operation is performed beyond 10 minutes, the robot
automatically enters the sleep mode, and the power indicator
off. In the sleep mode, you can press any button to wake up the
robot.
Power On/Off
Press key to start cleaning at the self-empty station, the robot
dynamically plans the cleaning path according to the map generated
by scanning and completes the cleaning of different zone one by
one. In each zone, the robot starts edge cleaning firstly and then
fulfills the remaining part by zigzag cleaning.
Start Cleaning
Zone 1: Cleaned Zone 1: Cleaned
Zone 3: cleaning
Zone 4: to be cleaned
Notes：
!
!
The robot can not enter sleep mode while charging on the self-empty station.
If the sleep time exceeds 12 hours, the robot automatically powers off.
!