User's Guide

5
2.1.1 The camera must be loaded with the SIM and SD cards to work properly. Before using it, please
format the SD card with your mobile phone APP
2.1.2 Open the buckles, open the face cover, insert the SIM card with the angular end facing the camera
and the metal contact surface facing down.
2.1.3Insert the SD card with the metal contact surface facing down into the slot, and push inside until a
"click" is heard.
Notice:
Do not unplug the Nano SIM and SD cards while the camera is working, otherwise, the Nano SIM and SD
cards will be damaged.
Please use a qualified class 10 or above SD card.Poor-quality memory cards can cause the camera to be
unrecognizable or inactive
2.2 Installation of battery
The camera is powered by 8pcs regular AA batteries,and the installation method is as follows:
2.2.1 As the picture shown, remove the compartment latch and open the battery compartment cover.
2.2.2 Install 8pcs batteries according to the icon on the machine.
2.2.3 Keeping the battery compartment clean, covering the battery cover and lock the latches.
2.2.4 Toggle the【Function switch】to "Photo" or "Video" gear, if the networking indicator is on, it indicates
the battery is installed correctly.
1.Battery cover latch
2.Pay attention to the battery’s
positive and negative poles, do not
install the opposite
3.Battery compartment door
2.Insert the Nano SIM card according to this direction
3.Insert the SD card according to this direction
1.Open the buckles