User Manual

ManualsBrandsShenzhen Four Seas Global Link Network Technology ManualsComputers & AccessoriesWireless Access Point



UserGuide

WirelessAccessPoint

M/N:CF‐E325N

TradeMark:COMFAST

Manufacturer: ShenzhenFourSeasGlobalLinkNetworkTechnologyCo.,Ltd



1、 NetworkBridgeInstallation

（1）、AP mode：convert a wired network to wireless WIFI signal for other to connect to the

Internet

（2）、RepeaterMode：receivetheremotewirelesssignal，andthentransmitawirelesssignal，

theterminaldevicescanreceivecanreceivethissignalbywirelesswayorwebcable.

（3）、RouterMode：accessawirednetworkofmodemorswitch,selecttheroutermode,the

devicecansendoutwirelessWIFIsignalandsharewithotherterminaldevices.

（4）、ClientMode：receivewirelessWIFIsignal,thenconvertwirele sssignaltoawirednetwork,

theterminal

devicesconnecttothenetworkbywebcable.

2、APModesettings

（1）、Select“APmode”,thentypeintheIPAddress,SubnetMaskanddefaultgatewayaccording

toyourRouter’snetworkaddress,clickon“Next”.

（2）、SetyourSSIDnameandselectthetypeofoncryption,then

clickon“Apply”.

3、Bridgesoftwareinterface

（1）、Openabrowserandtypein192.168.10.1andenterthelogininterface,thedeviceprovides

Chinese and English languages for choice ,the user name and password are both “admin” by

default.

（2）、Click to Login, enter the AP mode of the

 four working modes; here please selectthe

correspondingworkingmodedependingonyourtypeuse.

4、RepeaterMode

（1）、Selectthe“RepeaterMode”,enterthesettinginterface.

（2）、Clickthenextstep,thedevicewillscanthesurroundingwirelesssignals;choosetheSSID,

typeincorrectpasswordand

connect.

（3）、TheRepeaterwasconnectedbyupperwirele ssnetworkpasswordnetwork,ifneedchange

fornewSSID,clickthetop”FunctionSettings”button,selectWirelessBasicParameterSettings”

pagetomodifytheSSIDname.

5、RouterMode

（1）、Selectthe“RouterMode”.

（2）、click the next step,

 and the connections have “DHCP”, ”Static IP”, ”PPPOE” three types.

Select the corresponding connection, click the next step depending on your network

Summary of content (3 pages)

PAGE 1
User Guide Wireless Access Point M/N: CF‐E325N Trade Mark: COMFAST Manufacturer: Shenzhen Four Seas Global Link Network Technology Co., Ltd 1、 Network Bridge Installation （1）、AP mode：convert a wired network to wireless WIFI signal for other to connect to the Internet （2）、Repeater Mode：receive the remote wireless signal，and then transmit a wireless signal， the terminal devices can receive can receive this signal by wireless way or web cable.
PAGE 2
environment. （3）、Here take “PPOE” as an example, type in the ISP account user name and password correctly, then click on “Next” to set up the SSID name and wireless password, click on “apply” 6、Client Mode （1）、Select the “Client Mode” , click next step, the device will scan the wireless signal around here. （2）、Find the wireless signal to be connected, type in correct password to connect. Terminal equipment can convert the received wireless signal to a wired network through the network cable.
PAGE 3
access the DHCP enabled router or switch to use. In addition to setting AP mode which requires resetting or manually setting the IP to enter the gateway of the device, other working modes can directly get into the gateway. FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.