User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
48
HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port.
ONVIF Port:
By default, the ONVIF port is set to 888. Also, they can be assigned with another port
number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other
existing ports.
Another way to change the HTTP port NO.
Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the
IP address, and click on ”Network Configuration”, this brings up the network configuration box as shown :
Step 2: Enter the username and password of the Administrator (default username is admin with a blank
password), and click “OK” to apply changes.