User's Manual
www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
20
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)
3) Outdoor------Outdoor surveillance
Stream
The default stream supports multiple modes, For example: HD Mode/720P/23fps/2M meanings: Stream
type / Resolution / Maximum frame rate/ Bit rate.
1) Stream type : It is used to identify the stream type.
2) 720P/ VGA
There are three resolutions, the bigger one is 1280*720P, and the smaller one is VGA (640*480) pixels.
The bigger the resolution is , the better of the image quality is. If you are accessing the camera via
internet and want to get more fluent video streaming, please select resolution VGA.
3) Maximum frame rate
You should lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you
can achieve fluently video.
4) Bit rate
Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration
should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is
large, that will lead to video can not play well.
You can reset the stream type on “Settings-> Video-> Video Settings” panel.
After changing, please re-login the camera and you can see the modification.
Section 4 Pan/Tilt Control
1----- Up control button 2----- Down control button,
3----- Left control button 4----- Right control button,
5----- Up-Left control button 6----- Up-Right control button
7----- Down-Left control button 8----- Down-Right control button
Click this button and go to center