User Manual Wireless HD Baby Monitor FosBaby P1 V1.
www.foscam.com Table of Contents Table of Contents ...............................................................................................................................................1 1 Overview.......................................................................................................................................................1 1.1 Key Features ......................................................................................................................................
www.foscam.com 1 Overview HD Wireless Baby Monitor is an integrated wireless camera with a color CMOS sensor enabling viewing in High Definition resolution. It combines a high quality digital video camera, with a powerful web server, to bring clear video to your desktop and mobile devices from anywhere on your local network or over the Internet. It supports P2P function.
www.foscam.com Software to manage and monitor multiple cameras Support record schedule Support Playing Lullabies Motion, sound, temperature and humidity Detection via FTP and Email Support Cloud Service, Remote access your Baby Monitor without port forwarding Support EZlink, Link to WiFi network easily 1.2 Read Before Use Please first verify that all contents received are complete according to the Package Contents listed below.
www.foscam.com FosBaby P1 The Information of Wi-Fi Status Light (Blue): Wi-Fi Status Light Description Off No Wi-Fi connection Flashing every 0.1 seconds Soft AP takes effect Flashing every 0.2 seconds EZLink takes effect (default) Flashing every 0.
www.foscam.com Note: The default storage path of snapshot and alarm files is FTP. 1.5 Micro-SD Card This camera supports SD Card and the max size of SD card must be under 32G. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD Card may be cannot work well. Go to the SettingsDevice StatusDevice Status page, you can see the SD card status. 2 Access the Camera 2.
www.foscam.com 2.1.1 Soft AP Connection 1. Start camera: power on, the indicator light of camera will light on, and a short musical tone indicates that the startup is completed. 2. Press the Soft AP button for 3-5 seconds. The indicator begins to twinkle at very high frequency. 3. Use a terminal which could search the WLAN (desktop, laptop, mobile phone, or pad. This part takes laptop as an example.) to search for the AP named "FosBaby_******" or "FosBaby P1_******" for connection. 4.
www.foscam.com 6. After logging in for the first time, it will go to "Setup Wizard” automatically. Please set the basic parameters of the camera, such as camera name, camera time, wireless settings (The camera connect to your wireless router: Wireless Network List - enter the password of your wireless router ), IP configuration. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Notes: We recommend you to choose to manually set the IP when you know some knowledge of the network. It needs about 1 minute to connect the camera to your router. 7. After completing the setup wizard, you should press the Soft AP button for 3-5 seconds to cancel the Soft AP connection mode, this is located on the back of your camera. The Network light begins to slowly flash(once per second), it indicates that the wireless connection is successful. (Only Fosbaby P1) 8.
www.foscam.com Notes: You could also download the IP camera tool from our website www.foscam.com for free. If you have multiple cameras and you cannot determine which camera you are going to log in. Please match the "Device MAC address" on the search tool with the MAC address on the label pasted of each camera. 10. Double-click the camera list here, and your default browser will open up to the login page. Input the username and password you has changed.
www.foscam.com Note: 64-bit browser is not supported. 2.1.2 WPS (WI-FI Protected Set-up) Before using WPS wireless connection, you need to: Make sure that your wireless router has the WPS function, and has been properly connected to the Internet. WPS button on the wireless router is typically located on the front panel or rear panel. TP-LINK router's WPS button is called QSS (Quick Security Setup). (1) Press and hold the WPS button for three seconds.
www.foscam.com Access your Camera from the Internet You can access the Camera from the Internet (remote access). Enter the WAN IP address and port number in your standard browser. For example, you would enter http:// 183.37.28.254:85 NOTE : Make sure port forwarding is successful. You can do port forwarding two ways. Login to your router to enable the “UPNP” function. You can then login to the camera as administrator, choose Network, and then choose UPnP to enable UPnP.
www.foscam.com 2. Enable UPnP and DDNS in the camera’s settings page. We recommend you to use the DDNS by factory default. 3. You can see the port of your camera here. If you want to set Remote Access for several cameras on the same network, you will need to change the HTTPS port for each camera. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4. If the UPnP of the router has been enable, you do not need to perform following steps. Otherwise, you need to select one of the following methods to configure port forwarding on your router. For these steps, we will be using the TP-LINK brand wireless router as an example. If there is a UPnP function in your router： Choose “Forwarding > UPnP”, make sure that the Current UPnP Status is Enabled.
www.foscam.com 5. Now you can access your IP camera by https://domain name: HTTPS port via the Internet. 2.3 Using the VLC player The camera supports RTSP streaming, here you can view the camera by VLC player. RTSP URL rtsp:// [user name][:password]@IP:HTTP port number/videostream The part in the square brackets can be omitted. user name & password: The user name and password to access the camera. This part can be omitted. IP: WAN or LAN IP address.
www.foscam.com Enter either one of the following four URLs in the VLC rtsp://admin:123@192.168.1.11:88/videoMain rtsp:// @192.168.1.11:88/videoMain rtsp://:123@192.168.1.11:88/videoMain rtsp://admin@192.168.1.11:88/videoMain Open the VLC, and go to “Media”--”Open Network Stream” option, then enter the URL in VLC. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Sometimes you may need to enter the user name and password for another time. Click OK and you can see the real-time preview. If you cannot play the video in the VLC player, please check the port mapping. You can read Quick Installation Guide about how to configure port forwarding. NOTE: If you modify the camera’s username or password, you had better reboot the camera to apply the new username and password in authentication in the VLC. 2.
www.foscam.com managing all FOSCAM IP surveillance cameras with numerous features. It supports management or monitoring multiple cameras for monitoring, recording, playback, and alarm management with efficient control. You could refer to the CMS user manual in the CD. 3 Surveillance Software GUI Please refer to the Quick Installation Guide if you install the camera at first time. After finishing quick installation, you can take time to learn the operation of the software. 3.
www.foscam.com FosBaby P1 NOTE： When setting up your camera for the first time, it will request that you modify the default username and/or password if both are still set to default. Input the new username and password, click "Modify" to complete the modification. You will now use the new username and password to log in to the camera in the future. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 3.2 Surveillance Window Section 1 Live Video/ Settings/ Playback buttons : Real-time temperature and humidity display. : Path to surveillance window. Click this button and back to the surveillance window. : Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do advanced settings. : Click this button and back to the Playback panel to view the stored audio files stored in the SD Card.
www.foscam.com 2) 60HZ ---------Indoor surveillance (Region: USA, Canada) 3) Outdoor------Outdoor surveillance Stream The default stream supports multiple modes, For example: HD Mode/720P/23fps/2M meanings: Stream type / Resolution / Maximum frame rate/ Bit rate. 1) Stream type : It is used to identify the stream type. 2) 720P/ VGA There are three resolutions, the bigger one is 1280*720P, and the smaller one is VGA (640*480) pixels. The bigger the resolution is , the better of the image quality is.
www.foscam.com Section 5 Cruise / Preset settings Cruise Settings The default cruise tracks have two types: Vertical and Horizontal. Vertical: The camera will rotate from up to down. Horizontal: The camera will rotate from left to right. : Start cruise. : Stop cruise. If you want to define or change the cruise trace, please go to Settings PTZ Preset Settings panel. How to do cruise? Firstly: Select one track in the track dropdown list.
www.foscam.com positions. Add Click this icon to save the position you need the camera to remember Delete Select one preset position and click this button to delete it. GO Select one preset position in the preset drop-down list and click Go to make the camera move the preset position How to do preset position? Firstly, move the camera and stop at a desired place where you want make preset position. Secondly, click button and enter a descriptive name for the preset position.
www.foscam.com Section 8 Lullabies : You can click this button to adjust the playing mode of songs. Three playing modes are available for selection: Circular playing of all songs, In-order playing, and Circular playing of a single song. : You can click this button to set the duration before the camera enters the standby state.
www.foscam.com 1----- Play Click it to play the video of the camera 2----- Stop Click it to stop the video of the camera 3----- Talk Click the button and the icon will become to , then talk to the microphone that connected with PC, people around the camera can here your voice. Click the icon again and stop talking. 4----- Audio Click this icon, the icon will become to you can hear the sound around the camera by the earphone or speakers that connected with PC.
www.foscam.com 4 Advanced Settings Click the button “Settings”, goes to Administrator Control Panel to make advanced camera settings. 4.1 Setup Wizard In the Setup Wizard page, you could complete the basic parameters FosBaby, such as device name,system time,wireless networks, IP address, etc.follow the prompts. Device Name: You could name yourself for your camera. System Time: Select the time zone you need to set the date, time,format, etc.
www.foscam.com IP: Set IP address of FosBaby. You could choose to obtain an IP automatically or set the IP address according to your needs. 4.2 Status Status contains four columns: Device Information, Device Status, Session Status and Log, it will show you various information about your camera. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.2.1 Device Information Camera Model: The camera model NO. Camera Name: The Device Name is a unique name that you can give to your device to help you identify it. Click Basic Settings and go to Camera name panel where you can change your camera name. The default device name is anonymous. Camera ID: Display the wired MAC address of your camera. For example Device ID is 000C5D000088, the same MAC ID sticker is found at the bottom of the camera. Camera Time: The system time of the device.
www.foscam.com 4.2.3 Session Status Session status will display who and which IP is visiting the camera now. 4.2.4 Log The log record shows who and which IP address accessed or logout the camera. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Reboot the camera and clear the log records. 4.3 Basic Settings This section allows you to configure your camera’s Name, Time, Mail, User account and Multi-Device. 4.3.1 Camera Name You can define a name for your camera here such as apple. Click Save to save your changes. The alias name cannot contain special characters. 4.3.2 Camera Time This section allows you to configure the settings of the internal system clocks for your camera. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Time Zone: Select the time zone for your region from the drop-down list. Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server. Choose the one that is closest to your camera. Sync with PC: Select this option to synchronize the date and time of the Network Camera with your computer. Manually: The administrator can enter the date and time manually. Note select the date and time format.
www.foscam.com How to change the password? Firstly, select the account which you want to change the password, then select “Change password”, enter the old password and the new password, lastly click modify to take effect. How to add account ? Select one blank column, then enter the new user name, password and privilege, last click Add to take effect. You can see the new added account on the Account list. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Delete ：Select the account which you want to delete, then click Delete button to take effect. NOTE: The default admin account cannot be deleted, but you can add other administrator users. How to change the username ? Firstly, select the account which you want to change the username, then select “Change username”, enter the new password, lastly click modify to take effect. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.3.4 Multi-Camera If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed. The firmware within the camera can support a maximum of 9 devices monitoring all at the same time.
www.foscam.com Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which series the camera belongs to. Back to Surveillance Windows, and click Four Windows option, you will see four cameras you added. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Using the same method, you could to add other cameras continue. It can add up to 9 road equipment. Add cameras in WAN If you want to view all cameras via the internet (remote computer), you will need to add them using DDNS domain name. Firstly, make sure all of the cameras you added can be accessed through the internet. (Read How to configure DDNS settings) Login to the first camera using a DDNS domain name and port. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Click Multi-Device Settings. Choose The 2nd Device. Fill in the 2nd camera’s name, DDNS domain name, port number. Enter user name and password and then choose Add. 1----- The camera model: MJ or H264. 2----- The 2nd camera’s name 3----- Fill in the 2nd camera’s DDNS host not IP NOTE: The MJ series have the same HTTP Port NO. and Media Port NO. 4 ---- Enter the 2nd camera’s user name and password 5---- Click Add button and to take effect Shenzhen Foscam Intelligent Technology Co.
www.foscam.com NOTE: Here the Host must be entered as the second camera’s DDNS domain name, not its IP. Return to video window. You will see all of the cameras accessible through the internet. When you are away from home, you can use the first camera’s DDNS domain name and port to view all the cameras via internet. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.3.5 Status Light 4.3.6 Night Lamp (For FosBaby P1) You can turn on / off the night light manually. 4.4 Network This section will allow you to configure your camera’s IP, DDNS, Wireless Settings, UPnP and Port. 4.4.1 IP Configuration If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of your router or computer. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Changing settings here is the same as using the IP Camera Tool. It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don’t know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows: Control Panel →Network Connections →Local Area Connections →Choose Support →Details Shenzhen Foscam Intelligent Technology Co.
www.foscam.com If you don’t know the DNS server, you can use the same settings as the Default Gateway. 4.4.2 Wireless Settings Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the left side of the screen, then click “Wireless Settings.” Click the Scan button and the camera will detect all wireless networks around the area. It should also display your router in the list. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network, such as the name and the encryption, will be filled into the relevant fields automatically. You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the password you filled in are exactly the same for your router. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable. Never shut down the power of the camera until the camera is able to connect to the wireless network. The IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the IP of the camera will show again on the window of the IP Camera Tool.
www.foscam.com 4.4.4 DDNS FOSCAM camera has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. FOSCAM domain name Here take test09.myfoscam.org for example. Go to option of DDNS on the Settings->Network panel, you can see the domain name. Now you can use http:// Domain name + HTTP Port to access the camera via internet. Take hostname test09.myfoscam.org and HTTP Port NO.
www.foscam.com Please register an account step by step according to instructions on www.no-ip.com After registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Secondly: Login the link with the registered username and password to create your domain name. Please create the domain name step by step according to instructions on www.no-ip.com Step 2, DO DDNS Service Settings within the Camera Please set DDNS Settings within the camera by host name, a user name and password you’ve got from Shenzhen Foscam Intelligent Technology Co.
www.foscam.com www.no-ip.com Take host name ycxgwp.no-ip.info, user name foscam, password foscam2012 for example. Firstly, goes to option of DDNS Settings on the administrator panel. Secondly, select No-Ip as a server. Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as DDNS domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective.
www.foscam.com internet. Take hostname ycxgwp.no-ip.info and http NO. 2000 for example, the accessing link of the camera via internet would be http:// ycxgwp.no-ip.info:2000 4.4.5 UPnP The default UPnP status is closed. You can enable UPnP, then the camera’s software will be configured for port forwarding. Back to the “Device Status” panel, you can see the UPnP status: The camera’s software will be configured for port forwarding.
www.foscam.com HTTPS port: The default port is 443. You can use the url to access the camera: https:// IP + HTTPS port. ONVIF Port: By default, the ONVIF port is set to 888. Also, they can be assigned with another port number between 1 and 65535(except 0 and 65534). But make sure they can not be conflict with other existing ports. Another way to change the HTTP port NO.
www.foscam.com Step 3: Wait around 10 seconds, you’ll see that the camera’s IP address has changed. In our example it was changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the IP address is now fixed at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the camera is powered off and back on, the camera will remain on this IP address.
www.foscam.com Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you select.
www.foscam.com Figure b FTP server: If your FTP server is located on the WLAN, you can set as Figure a. If you have an FTP server which you can access on the internet, you can set as Figure b. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. FTP Mode: Here supports two modes: PORT and PASV. Username/password: The FTP account and password. Click Save to take effect. Click Test to see if FTP has been successfully configured. 4.4.
www.foscam.com Stream type: There are four types to identify different streams you have set. Resolution: The camera supports multiple types, For example: 720P, VGA. The higher the resolution is the clearer video will become. But the code flux will become larger too, and it will take up more bandwidth. Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should combine well with the network bandwidth.
www.foscam.com 4.5.2 On Screen Display This page is used to add timestamp and device name on the video. Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the video. Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on the video. 4.5.3 Privacy Zone This page is used to set some mask as privacy zone on the video. Allow On Screen Display Mask: There are two options: Yes or NO.
www.foscam.com Click OK button and return to the OSD page, click Save to take effect. Back to the surveillance window, you can see the mask area as the following picture: Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.5.4 Snapshot Settings On this page you can set the snapshot pictures’ image quality and the storage path. Snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer. Pictures Save To: FTP or SD card. If you have done FTP and Alarm settings, when alarming, the camera Shenzhen Foscam Intelligent Technology Co.
www.foscam.com will snap pictures to the FTP automatically. Enable timing to capture To enable capture interval, follow the steps below: 1 Select Enable Motion detection 2 Capture interval:The interval time between two captures. 3 Select the capture time Capture anytime Click the black button up the MON, you will see all time range turn red. When something moving in the detection area at anytime, the camera will capture.
www.foscam.com 4.6.2 Motion Detection The camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or upload images to FTP. To enable motion detection, follow the steps below: To enable motion detection, follow the steps below: Step 01: Enable Motion detection Step 02: Sensitivity---- It supports five modes: Lowest, Lower, Low, Medium, and High. The higher the sensitivity, the camera will be more easily alarmed. Select one motion sensitivity.
www.foscam.com Step 04: Select the alarm indicators When the motion has been detected, the alarm status will turn to Detect alarm. There are four alarm indicators: A Camera Sound There is an embedded speaker inside the camera, so if you select Ring, when the motion has been detected, the people around the camera will hear beep alarm sound. B PC Sound Click it, when the alarm is triggered in FosBaby, your PC opportunity to sound the alarm.
www.foscam.com The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record page and change the alarm time settings. Step 05: Set detect area Click set detect area and it pop up a window, then you can draw the detection area. Click Back button after settings. When something moving in the detection area, the camera will alarm. Step 06: Alarm Schedule ① Alarm anytime when motion is detected Click the black button up the MON, you will see all time range turn red.
www.foscam.com ② Specify an alarm schedule Click the week day words, the corresponding column will be selected. For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. ③ Press the left mouse and drag it on the time boxes, you can select the serial area. Step 07: Click Save button to take effect.
www.foscam.com If the Sensitivity is set to “High”, the camera will detect the sound whose more than 55db. If the Sensitivity is set to “Medium”, the camera will detect the sound whose more than 65db. If the Sensitivity is set to “Low”, the camera will detect the sound whose more than 75db. If the Sensitivity is set to “Lower”, the camera will detect the sound whose more than 85db. If the Sensitivity is set to “Lowest”, the camera will detect the sound whose more than 95db. 4.6.
www.foscam.com The way to set is the same to set motion detection. 4.6.5 Humidity Detection(For FosBaby P1) It monitors the humidity in the environment, once it exceeds the range you set up, the camera will send message. However, the lower limit of the safe humidity range must be set to 0% or higher, the upper limit must be set to 100% or lower, and the upper limit shall at least be 5% higher than the lower limit. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 4.7 Record This section will allow you to change the record files storage path and the record time. 4.7.1 Storage Location On this page you can change the alarm and manually recording storage path. Alarm Recording Location : SD card, FTP. Check “SD card” : The video will be saved in SD card. Make sure the camera has been inserted the SD card. On this page, you can see the available space of the SD card. Check “FTP” : The video will be saved in FTP. Please refer to "FTP settings.
www.foscam.com 4.7.4 Scheduled Recording When the video is selected as FTP, the device supports scheduled recording. When the video is selected as SD card, the device supports pumping frame recording. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Frame Rate: There are six frame selections, such as 1/30, 4/30, 8/30, 15/30, 24/30, 30/30. Recommended default is 4/30. The greater the Frame rate is, the sharper picture quality is, and the greater of storage space is, the shorter the storage time is. Record full strategy: When the SD card is full, you can choose to cover the previous recording, or stop recording. Audio Record: You can choose "yes" or "no". NOTES: Scheduled recording only supports video saved to the SD card or FTP server.
www.foscam.com 4.7.5 SD Card Management This camera supports SD Card and the max size of SD card must be under 32G. When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD Card may be cannot work well. Go to the SettingsStatusDevice Status page, you can see the SD card status. The default storage path of alarm record files is SD card, when the available size of SD card is less than 256M, the old record files will be deleted automatically. 4.
www.foscam.com Simple playing control is available: Play/stop, previous/next song, in-order playing, circular playing of a single song, circular playing of all songs, and volume control (on the lower part of the video preview page). Two ways are available for storing the rhyme into an SD card: 1. Remove the SD card from the machine, connect the SD card to the computer using a card reader, and import songs to the card. 2. Insert the SD card into the machine and import songs on the SD card management page.
www.foscam.com 4.9.1 Pan & Tilt Speed There are five PT speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ speed type and click save button. 4.9.2 Cruise Settings This section explains how to add/ delete one cruise track. Setting the Cruise Mode There are two cruise mode: Cruise time and Cruise Loops. Cruise time: Select Cruise time from Cruise Mode drop-down, then you can set the Cruise time of the camera.
www.foscam.com camera. Click Save to take effect. Manage the Cruise Track There are two default cruise tracks: Vertical and Horizontal. Vertical: The camera will rotate from up to down Horizontal: The camera will rotate form left to right. Add: Add one cruise track, then click save button. Delete: Select one cruise track and delete it. Save: After you modify the Dwell time, you should click Save button to take effect.
www.foscam.com Thirdly: Click OK button and the cruise track will take effect. You can add other cruise track as the same method. For example: I have added three preset points to the “track 1”, that means : When I select the “track 1” on the surveillance window, the camera moves as the following track: upright then Right Most last downleft. You can add preset on the left of the surveillance window. Add the preset. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com After add the cruise track, back to the surveillance window, click Cruise, here you can see all cruise tracks you have added. There are other buttons between the Preset points and Cruise track, you can use these buttons to adjust the order of preset points or add/delete one preset points in one cruise track. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Add: Select one preset points and add it to the selected cruise track. Delete: Select one preset points you have added to one cruise track, click delete. Move up/ down: Select one cruise track, adjust the order of preset points in one cruise track. Attention: Considering the life time and thermal issue of the motor, it’s not recommend to do long-time cruise. 4.9.3 Start-Up Options Here section will allow you to set the stop position after the camera reboots.
www.foscam.com 4.10 Firewall This section explains how to control the access permission by checking the client PC’s IP addresses. It is composed of the following columns: Block access from these IP addresses and Only allow access from these IP addresses. Enable firewall, If you select Only allow access from these IP addresses and fill in 8 IP addresses at most, only those clients whose IP addresses listed in the Only allow access from these IP addresses can access the Network Camera.
www.foscam.com 4.11.2 System Upgrade Your current firmware version will be displayed on your screen. You may go to the Status Device Information Page to check for the latest firmware versions available. Click Browse, choose the correct bin file and then click System upgrade. Make sure you have unplugged the SD card. Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
www.foscam.com CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade the firmware unnecessarily. Your camera may be damaged if miscon figured during an upgrade. NOTE: Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t upgrade the firmware in WAN through the web UI, or else the upgrade process may be failed. Please ensure you have download the correct firmware package for your camera before upgrading.
www.foscam.com 2) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the default factory settings before using the camera. 4.11.3 Patch Installation 4.11.4 Factory Reset Click All reset and all parameters will return to factory settings if selected. This is similar to press the Reset button on the bottom of the camera. 4.11.5 Reboot Click Reboot System to reboot the camera. This is similar to unplugging the power to the camera.
www.foscam.com Section 1 Define the Record files time and Type : The storage path of record files : Here supports three types: current day, current month and All records. Another way, select the time on the time&date manually. : The type of records files, Here supports two typs: Normal record, Alarm record and All records. : Click this button to search all record files satisfy the conditions you selected. Continuous Play: Select the checkbox to play continuously all the record files.
www.foscam.com Section 3 Play/Stop/Audio/Full screen buttons Please select one record file before use these buttons. Click this button to play the record files Click this button to stop the record files Open or stop audio Click this button to make full screen, and double click left mouse to exit full screen. 6 Appendix 6.1 Frequently Asked Questions NOTE: Any questions you would meet, please check Network connections firstly.
www.foscam.com Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Shenzhen Foscam Intelligent Technology Co.
www.foscam.com Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 6.1.2 Uninstall the add-on of Firefox browser, Google Chrome and IE Chrome. Shenzhen Foscam Intelligent Technology Co.
www.foscam.com 6.1.3 I have forgotten the administrator password To reset the administrator username and password, press and hold down the RESET BUTTON for 5 seconds. Upon releasing the reset button, wait for 20 seconds, the camera will reboot and the username and password will return to the factory default administrator username and password. Please power on the camera before reset Default administrator username: admin Default administrator password: No password 6.1.
www.foscam.com Open IE browser, then right click, select “Run as administrator” 6.1.5 Subnet does not match Check whether your ipcamera in the same subnet of your computer. The step is Control PanelNetwork ConnectionsDbclick Local Area Connections Choose GeneralProperties.Check subnet mask, IP address and gateways. When you set IP address please make sure they are in the same subnet. Otherwise you can't access camera. 6.1.
www.foscam.com NOTE: Make sure that your firewall or anti-virus software does not block the camera or ActiveX. If you could not see video, please shut down firewall or anti-virus software to try again. 6.1.7 Can’t access IP camera in internet There are some reasons: 1、ActiveX controller is not installed correctly 2、The port which camera used is blocked by Firewall or Anti-virus software. Please change another port number and try again.
www.foscam.com Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded FOSCAM domain name Username and password Default admin username: admin with a blank password 6.3 Specifications ITEMS Fosbaby P1 Sensor Image Sensor Display Resolution Lens High Definition Color CMOS Sensor 1.0M Pixels(1280*720) Min. Illumination 0 Lux (With IR Illuminator) Lens Type M12 interface f 2.5mm focal length f 2.5mm Aperture F=1.8 F=1.
www.foscam.com System Requirements Operating System Microsoft Windows 2000/XP, Vista, 7,8; Mac OS Browser Microsoft IE8 and above version or compatible browser; Mozilla Firefox; Google Chrome; Apple Safari.
www.foscam.com This device compiles with FCC Rules Part 15. Operation is subject to the following two conditions. This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
www.foscam.com Hardware Warranty Information FOSCAM provide 2-year limited warranty for naked product and 6-month limited warranty for accessories. Limited Hardware Warranty FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting from the shipping date of FOSCAM. This limited hardware warranty does not cover: Software, including the software added to the products through our factory-integration system, software that included in the CD,etc.
www.foscam.com Warranty Forfeiture Warranty is void if purchase from unauthorized distributor or reseller. Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or tampered with. Warranty is void for mishandling, improper use, or defacing the product. Abuse firmware upgrade without the authorized technician’s guidance.
www.foscam.com FOSCAM does not offer refunds under any circumstances. Please contact the point-of-purchase and follow their refund/return policy.
Warning : This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
