User's Manual
Table Of Contents
NVR User Manual
www.foscam.com
16
HDD Info
Choose Menu > Device Information > HDD Info in the Menu interface. The HDD Info interface is
displayed. You can see, refresh, and format hard disk.
Overwrite: When the HDD is full. You check the Overwrite checkbox, the NVR will cycle cover the
earliest recording; If not, the NVR will stop recording when the HDD is full.
Refresh: Click the Refresh button then you can update to the latest information on the hard disk.
Format Hard Disk: If the disk is uninitialized, select the record disk, then click Format Hard Disk to
format the record disk if the format is incorrect.