User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
68
Figure 4.78
Figure 4.79
CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade
the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.
NOTE:
Before upgrade the firmware, don’t upgrade the firmware in WAN through the web UI, or else the upgrade process may
be failed.
Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade
documentation (readme.txt file) in the upgrade package before you upgrade.
Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If not,
please download the firmware again until the sizes are the same. Your camera will not function correctly if a corrupt .bin
file is used.
Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System Firmware.
1) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.
2) After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the default factory
settings before using the camera.