User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
67
4.9 System
In this panel, you can backup/restore your camera settings, upgrade the firmware to the latest version, restore the camera
to default settings and reboot the device.
4.9.1 Back-up& Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters.
Figure 4.76
4.9.2 System Upgrade
Your current firmware version will be displayed on your screen. You may go to the Status Device Information Page
to check for the latest firmware versions available.
Click Browse, choose the correct bin file and then click System upgrade.
Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.
Figure 4.77
Upgrade Firmware by IP Camera Tool
Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware. Then
select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade.