User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
42
Thirdly, fill foscam as DDNS user, fill password foscam2012 as DDNS password, fill ycxgwp.no-ip.info as DDNS
domain and server URL, Then click save to make effect. The camera will restart and to take the DDNS settings effective.
Fourthly, after the restart, login the camera, and go to option of Device Status on the administrator panel, and check if the
DDNS status is successful.
If failed, please double check if you have input the correct hostname, user name, and password, and try to redo
the settings.
NOTE :
If you have set Third Party DDNS successfully ,the Foscam Domain Name will be invalid. The Third Party DDNS and
the Foscam Domain Name cannot work at the same time, the last time you configured will take effect.
D② o port forwarding within the router
Example: The camera’s LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200.
Firstly, login the router, goes to the menu of Port Forwarding or Port Trigger (or named Virtue Server on some brands
of router). Take Linksys brand router as an example, Login the router, and goes to Applications &
Gaming->Single Port Forwarding.
Secondly, Create a new column by LAN IP address & HTTP Port No. of the camera within the router showed as below.
Figure 4.32
③ Use domain name to access the camera via internet
After the port forwarding is finished, you can use the domain name+ http no.to access the camera via internet. Take
hostname ycxgwp.no-ip.info and http no. 2000 for example, the accessing link of the camera via internet would be
http:// ycxgwp.no-ip.info:2000
Assign a name
as you like here .
Fill the Media Port no. of the
camera on the column of
External Port and Internal Port .