User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
34
4.3.1 IP Configuration
If you want to set a static IP for the camera, please go to IP Configuration page. Keep the camera in the same subnet of
your router or computer.
Figure 4.20
Changing settings here is the same as using the IP Camera Tool.
It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If you don’t
know the subnet mask, gateway and DNS server, you can check your computer’s local area connection as follows:
Control Panel →Network Connections →Local Area Connections →Choose Support →Details
Figure 4.21