User's Manual

www.foscam.com
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
9
Figure 2.9
Figure 2.10
Step 2: Enter the username and password of the Administrator (default username is admin with a blank password),
and click “OK” to apply changes.
Step 3: Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it was
changed to 2000, so we see http://192.168.8.102:2000 in IP Camera Tool. Also, the LAN IP address is now fixed
at a static IP address of http://192.168.8.102:2000. This IP address will not change even if the camera is powered
off and back on, the camera will remain on this LAN IP address. This is very important that a static LAN IP
address is set, or you may have problems later with remote access and seeing the camera remotely if the camera
loses power and reconnects on a different LAN IP address. Make sure you set a static LAN IP address!