User's Manual

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade.

Figure 4.70

Figure 4.71

CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t upgrade

the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.

NOTE:

1) Don’t upgrade the firmware through the web UI in WAN, or else the upgrade may be failed.

2) Please ensure you have download the correct firmware package for your camera before upgrading. Read the upgrade

documentation (readme.txt file) in the upgrade package before you upgrade.

3) Upon downloading the firmware check the sizes of the .bin files. They must match the size in the readme.txt file. If

not, please download the firmware again until the sizes are the same. Your camera will not function correctly if a

corrupt .bin file is used.

4) Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device Firmware.

5) Never shut down the power of the camera during upgrade until the IP camera restart and get connected.

6) After upgrade successfully, please clear the cache of browser, uninstall the old plugin and re-install it, then reset the

camera to the default factory settings before using the camera.

Enter the User name and

password .