User's Manual

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Section7 Image quality settings

In this page, you can tune Hue, Brightness, Contrast, Saturation, and Sharpness to get higher quality.

Section8 OSD

If you have added time and camera name in the video, you can see it in the live window.

Go to Setting s ---Bas ic settings---Camera name panel, and you can change another device name. The default device

name is anonymous.

Go to Settings ---Basic settings---Camera time panel and adjust the device time.

Go to Settings ---Video---On Screen Display panel, you can add or no add OSD.

Section9 Play/Stop/ Talk/Audio/ Snap/ Record/ Full screen button

1------Play Click it to play the video of the camera

2------Stop Click it to stop the video of the camera

3------ Talk: Click the button and the icon will become to

, then talk to the microphone that connected with PC,

people around the camera can hear your voice if the camera has connected with audio output device. Click the icon again

and stop talking.

4------ Audio Click the button and the icon will become to

, you can hear the sound around the camera if the

camera has connected with other audio input device through the Audio Input port of the camera, Click the icon again and

stop audio.

5----- Snap: Click it to make snapshot and it pop up a window which picture you snapshot, right click in the window and

save the picture to anywhere you want.

6----- Record: Click the icon

and the camera start recording, you can see a green dot in the live window. Click

again and stop recording. The default storage path is C:\IPCamRecord. You can change the storage path: Go to Settings-

>Record-> Storage Location panel.