User's Manual Part 1

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

3------Left control button, 4------Right control button,

Click this button and go to center

Section5 Cruise settings ( FI9803P V2 haven’t this section)

If via RS485 interface to connect an external PT device, you can use this feature.

The default cruise tracks have two types: Vertical and Horizontal.

Vertical: The camera will rotate from up to down.

Horizontal: The camera will rotate from left to right.

: Start cruise. : Stop cruise.

If you want to define or change the cruise trace, please go to Settings PTZ Preset Settings panel.

How to do cruise?

Firstly: Select one track in the track drop-down list

Secondly: Click Start cruise button, the camera will cruise following the predefined path.

Thirdly: Click stop button and finish cruising.

Section6 IR LED Lights

Click Infra led and there are three modes to adjust the infrared led: Auto, Manual and Schedule.

Select one of these