User's Manual Part 1

www

.foscam.co

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

The lowest resolution is QVGA. The bigger the resolution, the better of the image quality is. If you are

accessing the camera via internet and want to get more fluent video streaming, please select resolution VGA.

3) Maximum frame rate

When the video format is 50Hz, the maximum frame rate is 25 fps. When the video format is 60Hz, the

maximum frame rate is 30 fps. You should lower frame rate when the bandwidth is limited. Normally, when the

frame rate above 15, you can achieve fluently video.

4) Bit rate

Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate configuration should

combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate is large, that will

lead to video cannot play well.

You can reset the stream type on “Settings-> Video-> Video Settings” panel.

Figure 3.10

Section4 Pan/Tilt Control( FI9803P V2 haven’t this section)

When via RS485 interface to connect an external PTZ device, you can use this feature.

1------Up control button, 2------Down control button,