User's Manual

IPCAM User Manual
If you want upload images to FTP server when motion trigger. You need set FTP Service
Settings first. (Figure 3.20/3.21) Then set motion alarm as below picture.
Choose it
You can set a interval for uploading images
Figure 3.27
There are two ways to alarm.
1) Alarm at any time when motion trigger.
Don’t choose Scheduler. The camera will alarm at any time when motion trigger.
2) Plan to alarm.
If you want the camera alarm during the time you set. You need choose Scheduler and set time
range. (Figure 3.28)
Click left button on the box of time range. It will turn blue. If you want delete it, just click left button
on it again. It will turn to gray.
Figure 3.28
3.13 PTZ Settings
Here you can set pan/tilt speed. Normally, PT speed is 5; The larger setting number, the lower
speed. Don’t enable the checkbox “disable preset” when you want to use the function of preset, it
will be effective after you reboot device
www.foscam.com
- 31 -