Installation guide

FI8918W Quick Installation Guide
www.foscam.com
- 2 -
1) Open the package. Take out the camera out of the box carefully.
2) Mount the antenna. Then take the Wi-Fi antenna, mount it on the SMA connector on the back
of the camera, screw the antenna to the bottom, and make the antenna stand vertically.
Figure 1.1 Mount the antenna Figure 1.2 Plug the network cable
3) Get the camera connected to the router, and get it powered.
Use the network cable to connect the camera to the router or the switch in the LAN network at your
home or your office. Plug in the power. The green network light at the rear of the camera will blink
and the camera will automatically pan/tilt. The red power light will also turn on.
Insert the CD into the CD drive of your computer and go to the folder “FI8918W”,find the folder “For
Windows OS”.
Double click IPCamSetup.exe to install, it pops up a window as below (Fig.1.3). Just click button
“Next” to finish the installation.
1. Hardware Installation
Start Installation
2. Software Installation