User's Manual

Shenzhen Foscam Intelligent Technology Co., Limited
Tel: [phone] Fax: [phone]
51
resolution is the clearer video will become. But the code flux will become larger too, and it will take up
more bandwidth. (The maximum frame rate for each model is different, please see the
“Specifications”. )
Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and
bit rate is large, that will lead to video can not play well.
Frame rate: You should lower frame rate when the bandwidth is limited. Normally, when the frame rate
above 15, you can achieve fluently video.
Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the
more likely you will get a better video quality, but at the cost of higher network bandwidth consumption.
Variable Bitrate: The two options are Yes and NO. Select Yes the bit rate is variable, and the highest
value isn't higher than Bit Rate Value (2Mbps). Select NO and the bit rate is constant with Bit Rate Value
(2Mbps).
4.5.2 On Screen Display
This page is used to add timestamp and device name on the video.
Display Timestamp
There are two options: Yes or NO. Select Yes and you can see the system date on the video.
Display Camera Name
There are two options: Yes or NO. Select Yes and you can see the device name on the video.
4.5.3 Snapshot Settings
On this page you can set the snapshot pictures’ image quality and the storage path.