User's Manual
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
56
Press the left mouse and drag it on the time boxes, you can select the serial area③ .
Step 9: Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the camera will
alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere
and anytime.
4.7 Record
This section will allow you to change the record files storage path and the record time.
4.7.1 Storage Location
On this page you can change the alarm and manually recording storage path.