User's Manual

2. Safety Instructions
Always follow the safety instructions during assembly and usage, to avoid any
unnecessary damage to the 3d printer or individual injury.
● After receiving the printer, please check the packing accessories first. If any accessories
are missing or damaged (non-human), please contact after-sales service within 3 days to
reissue. (If you do not contact after-sales service within the specified time, the possible costs
will be borne by the customer.)
● Wear gloves and mask to avoid direct skin contact when using. If resin splashes into the
eyes or mouth accidentally, rinse with plenty of water.
● Always use the LCD 3D printer in an open and well ventilated area. It is recommended t
o use the printer indoors and avoid direct sunlight and dusty environment.
● Recommended ambient temperature is 15-40 degrees, and the ambient humidity is 20%-
80%. Use outside of this range may bring poor printing results.
● In case of emergency, please immediately shut down the power of the 3D printer and co-
ntact the technical support.
● It is recommended to use protection glasses when cleaning/sanding the printed models
to avoid small particles contacting eyes.
● Please keep the 3D Printer and its accessories out of the reach of children.
● Please don't disassemble the 3D Printer by yourself, which will cause your warranty to ex-
pire. Please contact the after-sales service if you have any questions.
● If you do not use the machine for a long time, please pay attention to rain and moisture
protection for the 3D printer.
2