User's Manual

3.8.2 Slicing: After setting all parameters, click slicing to slice the model, or you can
interrupt; as shown in figure (7.29)
3.8.3 Preview and export: After the slice is completed, it will automatically enter the
preview mode (drag the slider at the upper or lower end to preview the layer), after
confirming that it is correct, you can export the slice file or return to re-edit; as shown
in figure (7.30)
3.8.4 Save the file to the U disk or the specified folder and then copy it into the U disk,
the slicing is completed.
(This machine recognizes *. ZIP format file, please save it as this format file)
Figure (7.29)
Figure (7.30)
22