User's Manual

3.6.4 Slice preview: support simultaneous preview of cross-section and solid model (click to
automatically jump to slice preview); as shown in figure (7.25)
3.7 Support setting interface; as shown in figure (7.26)
3.7.1 Z axis lifting height (default is 5mm), can be customized;
3.7.2 Support settings (refresh data , fold , expand )
(1) Choose the size of the support, there are three options: thin,
medium and thick;
(2) Top: Set the top of the support, there is a default value, the
user can according to their own preference changes;
(3) Central: Set the central support, there is a default value, the
user can according to their own preference changes;
(4) Bottom: Set the bottom of the support, there is a default value,
the user can bias make changes
(5) Bottom raft: Set the bottom raft, there is a default value, the
user can enter according to their preferences change
Figure (7.25)
Figure (7.26)
20