User's Manual

(6) Advanced setting interface; as shown in figure (7.22)
<Bottom light intensity PWM>: the intensity of the light source when printing the bottom layers (some
printers support this command);
<Light intensity PWM>: the intensity of the light source during normal layer printing (some printers
support this command);
<Anti-aliasing>: Anti-aliasing the sliced image to reduce the surface texture and improve the fineness
of the model surface;
Without anti-aliasing and with anti-aliasing enabled; see figure (7.23)
3.6.3 Slicing: Click on the slicing to start the model slicing process (you can choose the corresponding
parameters to slice);see figure (7.24)
Figure (7.22)
Figure (7.23)
without
x 4
Figure (7.24)
19