User's Manual

3.6.2 Slice setting; as shown in figure (7.16)

You can add your own machine type, and then set the relevant data;

<Import>: Import the saved machine configuration parameters; (The attached U disk has the

recommended parameter configuration file of the machine. When slicing, directly click "Import

Configuration File" in "Slice Settings" to import the parameters.)

<Export>: Export the configured machine parameters;

(1) Machine setting interface; as shown in figure (7.17)

<Name>: machine name, you can directly enter text for custom naming;

<Resolution>: the resolution of the projector or LCD screen, this parameter directly affects the

dimensional accuracy of printing;

<Locking ratio>: Under normal circumstances, the ratio of the forming size XY = resolution ratio, that is,

the locking ratio; in some cases, such as DLP projectors, due to accuracy or machine design reasons,

the XY size is slightly different, and it may not be maintained Proportion, fill in the actual projection

size;

<Size>: The maximum forming size of the machine;

Figure (7.16)

Figure (7.17)