User's Manual

3.3.2 Rotating model operation, as shown in figure (7.10)
(1) Rotate on the X, Y, and Z axes:
Click to rotate 15° in the positive direction of X/Y/Z;
Click to rotate 15° in the negative direction of X/Y/Z;
The cursor rolls the mouse on the number box, and rotates every +5°/ -5°;
(2) Place the cursor directly on the color bar on the model and hold down the left
mouse button to move (red-X, green-Y, blue-Z);
3.3.3 Zoom model operation, as shown in figure (7.11)
Zoom on the X, Y, and Z axes respectively:
(1) The cursor can be zoomed by rolling the mouse on the number box;
(2) When the scale is locked, no matter which axis is placed on the scale, the other two
axes will become larger and smaller in proportion;
(3) Reset: clear the previous zoom operation and re-zoom again;
Figure (7.10)
Figure (7.11)
12