User's Manual

3.2.7 hollowing: internal hollowing or external hollowing, the wall thickness
and accuracy need to be set; as shown in figure (7.7)
3.2.8 Tug hole: need to set shape and size, choose whether to keep the hole,
add a hole; as shown in figure (7.8)
3.3 Editing the model
3.3.1 Mobile model operation, as shown in figure (7.9)
(1) Move on the X, Y, and Z axes: place the cursor directly in the number box and roll
the mouse;
(2) The model can be directly placed on the bottom plate, centered, and reset;
Figure (7.7)
Figure (7.8)
Figure (7.9)
11