User's Manual

MID User Guide
7
External U disk:
2.10 Connecting to the Internet
Connecting to the internet by Ethernet：
Make the transfer box connected to the USB switch interface of the devices, and then plug the
network cable into the Ethernet port of the transfer box, in the upper right corner of the screen
appears "ETH".MID automatically obtain IP address via DHCP to connect the network. If you
want to set IP, please go to the Ethernet, and refer to “8.2 Convenient Set”.
Connecting to the internet by Wi-Fi：
1. Click MENU key to pop-up the menu, and then select "Settings";
2. Select "Wireless Control" in the settings menu;
3. Select the box behind to open Wi-Fi;
4. Open Wi-Fi Settings;
5. All the AP in the vicinity will be listed, click to select the name you want to connect to AP;
6. If the AP before the connection is successful, the AP information will be saved in the pop-up
window, select "Connect" starts to connect, choose "forget" to remove AP information;
7. If the AP is not encrypted, in the pop-up window, select "Connect" Start Connection;
8. If the AP is encrypted, enter the password in the pop-up window, and click "Connect" Start
Connection;
9. When internet connections are successful, the wireless connection icon in the status bar appears.
ADSL Settings:
The specific operations please refer to “8.2 convenient setting” ADSL settings.
2.11 USB connection
Device can connect to the computer, and then can copy files each other. If the devices with
memory card, it will display two available disks in the computer after connecting the computer.
One is memory card, and the other is the internal device storage.
Connect:
1. Make the device connected to the computer with USB data wire;
2. Now the device has been connected with the computer, then going to My Computer under
removable disk devices can copy files among the internal device storage, SD card and the
computers.
Turn off:
Method 1.Tap MENU→Notification→Turn off USB storage, and then tap “Turn off” you can
disconnect the device and the computer after the pop-up boxes.
Method 2.Click to move the letter icon on the computer, and select the security you can disconnect
the device connected to the computer.
You can unplug the USB cable after disconnecting.
Insert the network cable into the Ethernet interface like the left
picture after the adapter is connected to the device. You can
get the IP address automatically and also can select to set the
IP address by hand.
Insert the U disk into the USB interface
like the left picture after the adapter is
connected to the device. You can copy files
among SD card, U disk and internal device
storage after the U disk is connected to the
device. Copy method you can refer to“7.3
File Browser”.