User's Manual

MID User Guide
6
Don’t insert and remove the U disk repeatedly in a short time. It may cause the U disk damaged.
2.4 Remove and insert memory card and U disk
Please don’t remove the memory card and U disk while you are using the files of it. For
example, when you are viewing files in my photo, my video or my music, you remove the
memory card or U disk directly may cause the memory card and U disk damaged and the device
may exit automatically for protection. Remove memory card please refer to“2.2 How to use
Memory Card”; remove U disk please close all applications or documents which have been
opened from the U disk.
2.5 Storage Space
The device has three storage spaces: Internal device storage, U-disk and memory card. Internal
device storage is divided into system storage space and LocalDisk. The memory card named
“sdcard”; and the external U disk named “udisk”. System space only for storing system files;
LocalDisk can be used to store data files, the user can use space in the localdisk is probably 1GB.
The U disk and memory card is on its specific capacity, the maximum support to 32GB memory
card.
The specific storage-related information, please refer to 9.5 SD card, U-disk &device storage.
2.6 Power On and Off
1、Power On: When power adaptor is plugged, User can long press Power button (2 seconds) to
enter the Window Platform.
2、Power Off: User can long press (2 seconds) power button, then system will pop up equipment
selection dialog box. Select shutdown, System will then pop off the confirmation dialog box,
select OK you can shut down. User can long press (8 seconds) power button to shut down the
machine.
3、Hibernate: User can long press (2 seconds) power button, then system will pop up equipment
selection dialog box. Select dormancy, the system will into hibernation. In hibernate mode press
the power button to boot, and press the other key is invalid.
4、Airplane mode: User can long press (2 seconds) power button, then system will pop up
equipment selection dialog box. Select airplane mode, the system will into airplane mode.
2.7 Vibrate
Open vibrate:
Click volume icon on the status bar to adjust the volume to zero to put it on vibrate mode.
Close vibrate:
Make the volume is not zero, and then the vibrate mode closed.
2.8 Interface rotation
System interface can rotate the screen automatically according to the direction of the device.
Screen time on a two second, the conversion process will become dimmer, the screen rotate to
normal after finishing.
2.9 External Network Cable and U Disk
Transfer Box:
If you want to connect Ethernet or USB, you need to connect a transfer box first.
External network cable:
Make the interface of the adapter connect to
the USB interface of the device. There are
two USB interface and an Ethernet interface
on the adapter. You can connect external
network cable and U disk.