User's Manual

1.8 TF-CARD
TF-CARD SLOT：CONNECT T-FLASHT STORAGE CARD；
1.9 MiniUSB
MiniUSB Interface：to connect computer to transfer the data,charge or connect U disk
1.10 Reset Key
In the case of software crash,by thin article to press RESET key,the machine will shutdown
【Note】:It isn’t recommended that use the RESET key often,or the machine system will be
damaged.
2、First usage
2.1 battery management and charge
When you use the machine for the first time ,please secure that the battery is full-charged:
Insert the charge or adapter to the USB interface.
The first and second time must hold on 2 hours,later you can hold
On for about 4 hours.
【Note】：Standard charge(input: AC110~240V 50/60Hz Max：180MA output: DC5.0~5.5V/1.5A)needed,no
DC charge offered,by USB interface to charge .
During the charge,the battery icon is running.
When charge end,the battery icon will be green and stop running.
In order to extend lifetime,it is suggested that recharge when low battery ;
【Note】：1、If no usage for a long time,please recharge within a month to avoid damage to the
machine resulted from the exhaustion of battery.
2、After Power off,insert the charge,if the machine showes low battery、charging,a short
time needed before the battery can support the machine to start up.
3、If the machine need to be charged in a standard time , it must be in sleep mode.
2.2 Connect PC
Connect the PC and this machine by USB cable,then the machine shows USB has been connecting,choose
loading to transfer data,if not ,it is charging.
Enter the loading Model ,you can send、delete the file in the player or the storage card.
3.Operation Model
3.1 Main Model description
The model after turn on the machine:
On the main screen, you can :
Manage the software icon on the main screen:the icon becomes bigger after pressing the software icon for
3 seconds ,you can move it to anywhere you want
3.2 Status bar describe