Operation Manual

- 24 -
Click”OK” to return to factory default settings or click ”cancel” to cancel the factory reset.
SMS configuring and alarm indication

Configure by SMS

Users can check current weather data by sending SMS to the receiver terminal via at most 3 authorized mobile
numbers pre-determined on the PC software(Refer to USB configure tool Operation).
SMS command keywords are as follows (support for fuzzy matching)
keyword return
Current Current real time weather data
Max History Maximum values
Min History Minimum value
Telephone Telephone number
Interval Interval time
Status Device operation status
Alarm High and low alarm
Alarm On
Alarm enabled
Alarm Off
Alarm disabled
Reboot Reboot the device


1. View current weather Data

Current real time weather data can be achieved by sending a SMS from your Smartphone with the
command:
Current
Answer from the weather station is as shown in below figure by 2 messages: