User's Manual

12 13
917703_917725 INS Speak Out Size:80mmWx80mmH_Output:100%_Prints:1/1,Blk
Two Speak Out™ speakers can be paired for stereo or left/right
sound. Identify which speaker will be the Main speaker and
which speaker will be the Auxiliary speaker as your device only
needs to pair with the Main speaker.
1. Pair your device (see page 9) with the Main speaker.
2. Press the POWER/PAIRING BUTTON on the Auxiliary
speaker until the POWER/PAIRING LED INDICATOR
turns on and the power on tone sounds.
Note: Do not put the Auxiliary speaker into device pairing
mode.
3. Press the Pair2 BUTTON on the Main speaker (the
speaker that is paired with your device). The PAIR2 LED
INDICATOR will start flashing and audio will pause on
the Main speaker. The Main speaker will wait for a Pair2
connection for up to 2 minutes.
4. Press and hold the Pair2 BUTTON on the Auxiliary
speaker until the PAIR2 LED INDICATOR starts flashing
on the Auxiliary speaker.
5. Release the Pair2 BUTTON on the Auxiliary speaker.
6. After a few seconds, the PAIR2 LED INDICATORS on both
the Main Speaker and the Auxiliary speaker will be solid,
the Pair2 stereo tone will sound on each speaker, and the
speakers will be in stereo mode.
7. Resume audio from your device.
8. To put the speakers in left/right mode, press and hold the
Pair2 BUTTON on the Main speaker or the Auxiliary
speaker until the Pair2 left and right tones sound on each
speaker. To put the speakers back into stereo mode, press
and hold the Pair2 BUTTON on the Main speaker
or the Auxiliary speaker until the Pair2 stereo tones sound
on each speaker.
9. To exit out of Pair2 stereo or left/right modes,
power either speaker off by pressing the POWER/
PAIRING BUTTON.
Notes:
• To cancel PAIR2 mode, either press the POWER/
PAIRING BUTTON on the Main Speaker, a tone will sound
and the speaker will turn off, or wait 2 minutes for the speaker
to cancel pairing automatically.
• The POWER/PAIRING LED INDICATOR and the
USING Pair2
™
FOR STEREO OR LEFT/RIGHT SOUND