User's Manual

1. Power On/Off / Phone Button

2. Power Indicator

3. Volume - / Skip Backward Button

4. Voulme + /Skip Forward Button

5. Bluetooth Button

6. Bluetooth Status Indicator

7. AUX-IN Jack

8. DC Input Jack

9. USB Charging Port

TURNING THE SMPS-665 POWER ON/OFF

1. In power off mode, press and hold the Power On/Off Button for 4-5 seconds to

turn the unit ON. The Power indicator goes on and the sound is heard.

2. To turn the unit OFF, press and hold the Power On/Off Button for 4-5 seconds

to turn the unit OFF. The Power and the Bluetooth status indicator both go off.

OPERATING THE UNIT

Pairing (linking) a Bluetooth enabled cell phone or other Bluetooth enabled

device to the speaker

1. If the SMPS-665 has never been paired with a Bluetooth device before. You need

to follow the pairing instructions below to link the SMPS-665 with your Bluetooth

device.

• Turn the SMPS-665 On. Press and hold the Bluetooth Button. A short

beep tone is heard and the Bluetooth Status Indicator will flash rapidly, the

SMPS-665 is now ready to pair (link) with your Bluetooth device.

• Turn on the Bluetooth function of your Bluetooth device and enable the search