Data Sheet

FTY Technology Co.,Ltd
8.4 Moisture sensitivity
The Modules is a Moisture Sensitive Device level 3, in according with standard
IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of
components.
Moreover, the customer has to take care of the following conditions:
a) Calculated shelf life in sealed bag: 12 months at <40°C and <90% relative humidity
(RH).
b)Environmental condition during the production: 30°C / 60% RH according to
IPC/JEDEC J-STD-033A paragraph 5.
c) The maximum time between the opening of the sealed bag and the reflow process
must be 168 hours if condition
b) “IPC/JEDEC J-STD-033A paragraph 5.2” is respected
e) Baking is required if conditions b) or c) are not respected
f) Baking is required if the humidity indicator inside the bag indicates 10% RH or more
The module is limited to OEM installation only.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction to
remove or install module.
This module should be installed and operated with a minimum distance 20cm between the
radiator and your body. OEM integrator shall equipped the antenna to compliance with
antenna requirement part 15.203& 15.204 and must not be co-located or operating in
conjunction with any other antenna or transmitters. And OEM host shall implement a Class II
Permissive Change (C2PC) or a new FCC ID to demonstrate complied with FCC standard.
The OEM integrator is still responsible for testing their end-product for any additional
compliance requirements required with this module installed.
This module support 2.4G WLAN 2412-2462MHz which compliance with part 15.247.
The final end product must be labelled in a visible area with the following:
“Contains Transmitter Module “2A3AKFTYRM03FTV”