Installation Instructions

VB602-R Circuit Description

This product VB602-R is a parent unit TRANSCEIVER. When

press “on/off” button or plug in POWER SUPPLY, all the circuit will

start to work. The main chip MSF9300, which the OSC is 26Mhz and

with internal 32.768khz RTC circuit, will run the code by this OSC, then

it turns on the necessary circuit. include the RF circuit, speaker and LCD.

In this time, Processor works first to build up communication chain for

another baby unit TRANSCEIVER. When the wireless chain setup

successfully, It will receive the data from RF circuit, and then the

processor decodes the data stream, which encodes by mp4 format, so it

can display the moving pictures on the LCD and play the voice to

speaker.

PAGE 1
VB602-R Circuit Description This product VB602-R is a parent unit TRANSCEIVER. When press “on/off” button or plug in POWER SUPPLY, all the circuit will start to work. The main chip MSF9300, which the OSC is 26Mhz and with internal 32.768khz RTC circuit, will run the code by this OSC, then it turns on the necessary circuit. include the RF circuit, speaker and LCD. In this time, Processor works first to build up communication chain for another baby unit TRANSCEIVER.
PAGE 2
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.