TP PMS Tool Stateme ent This equipment has h been teste ed and found to comply with h the limits forr a Class d device, pursuant to Part P 15 of the FCC F Rules. Th hese limits are e B digital dessigned to provvide reasonable protection against a harmfu ul interference e in a ressidential installation.
TP PMS Tool y have any questions, please p contac ct us by the fo ollowing way ys: If you He eadquarters: 8F, Chuangyi Bldg., B No. 302 25 Nanhai Ave e., Nanshan, Shenzhen, S Ch hina 518060 Tell: 0086-755-82 2904730 Faxx: 0086-755-8 83147605 E-m mail: marketing@szfcar.com m We ebsite: http://w www.fcar.com Re egistered trad demark trademark in mainland China.
TP PMS Tool Catalog gue 1 2 3 Productt Overview ........... . ............................. 4 1.1 Produ uct Structure e ..................................... 4 1.2 Produ uct Parameter .................................... 5 Prepara ation Before e Use .................................. 5 2.1 Charg ging ............................................. 5 2.2 App Installing ......................................... 5 2.3 PP and Hard dware Set.................... 5 Connecting of AP Operation Guide ....
TP PMS Tool 1 Product Overview w FTP-100 is a portable tool wh hich is used to activate a or progrram tire pressurre sensors. This tool includesa a small hardware re set and anAndroid App. The App provides a humancom mputer interactio on interface. The user sends co ommands to the e hardware set through the App p, and the hardw ware set executtes the correspo onding operatio ons to tire pressu ure sensors. 1.1 Serial No.
TP PMS Tool ⑤ Power on-off ⑥ USB Interrface 1.2 2 2.1 Press for 1 to t 2 secondss to power on n or power off Located at the e bottom, the interface is us sed to charge. Produc ct Parameterr App Syste em ndroid5.0及以上 and above An Battery Ca apacity Ba attery 3.7V(8 800MAH) Bluetooth h 0 4.0 USB Interrface Miicro USB 2.
TP PMS Tool to restore r the Blu uetooth name. The e detailed ope eration is as fo ollows: 1) Press the to ool Power keyy to power on, and the Powe er pilot lamp come c up. 2) Run the Ap pp, and open Bluetooth B of th he Android pho one, then connectFTP100. If the icon i in th he App change es into , and the comm munication pilot lamp flashes f green,,it indicates th he Bluetooth connection c is successful.
TP PMS Tool 3.2 Activate Read the originall sensors insta alled in the car through this fu unction. When perrforming 【Pro ogramming】//【Copy by ac ctivation】,firsst get the origin nal sen nsor ID through h the Activate e function, then n copy the ID to o the new sens sor. How to activ vate sensors 1) Keep the e hardware sett close to the original o sensor within w 10cm, an nd enter the Activate e interface, the en select a tire and a click 【Acttivate】 button n.
TP PMS Tool 2) The following tip popss up, please operate o accord ding to the tip, and then OK】. click 【O Kee ep the tool top p close to the sensor from the e outer edge off the tire. If faile ed, try to do it from differen nt tire position or o direction. anded sensorss, sensors are e fixed in a pos siton 180 Forr the Ford carss using the Ba deg grees away fro om the tire valve. Try to find d the positon. 3) If activatting succeeds, the ID is displa ayed in the figu ure as below.
TP PMS Tool cre eate】-【Auto o create(1-5)】 】 3.3.1 Copy ID through Acttivation This function cop pies the original sensor ID to o programit to o the new sens sorsby acttivating the oriiginal sensor. The original sensor s ID can be read by th he car ECU, so you need not perform Learrn operation when w the new sensor s replace es the orig ginal sensor.
TP PMS Tool 3) If activating a succcesses, the ID and relevant information arre displayed. Programming】 】interface, clicck 【Copy by activation】, and a tip 4) Return to 【P pops up. ote: Keep the hardware h set top t close to th he sensor to be b programed d with No 10ccm.To avoid disturbing, d kee ep other senso ors100cm awa ay from the ha ardware set. 5) Click 【OK】to search the e new sensor, and don’t movve the sensor and the tool.
TP PMS Tool 6) If two sensorrs or more are detected,and d a tip pops up p, please take other sensors 100ccm away from the tool.Clickk 【Ok】 to restart searching. 7) If one sensorr is detected, click c 【Ok】to o program. 8) After programming finishes, and a an ID inform mation is listed..Click programming other sensors. 3.3.2 2 to retu urn for Manually y Create ID This function programs the origin nal sensor ID to o the new senssor by inputting the original nsor ID manuallly.
TP PMS Tool orig ginal sensor. How to inp put ID manually 1) Select 【Progrramming】-【M Manually create e】after getting th he original senso or ID. Note: Keep the harrdware set top p close to the new n sensor wiith 10cm.To avvoid disturrbing, keep oth her sensors 10 00cm away fro om the hardwa are set. 2) The tool searcches the new sensor, s and don n’t move the se ensor and the tool. t o sensors 3) If two sensorss or more are detected, and a tip pops up, please take other 100cm away from f the tool.
TP PMS Tool 6) If programing succeeds, clickk 3.3.3 3 to return fo or other sensor’ss programming g. Auto Cre eate ID Thiis function can n program 1-5 sensors IDs randomly r at the same time. Because the e IDs are creatted randomly by b the system, and the ECU U cannot read them, t so you u need perform m Learnopera ation to write th he IDs to ECU when new se ensors rep place original sensors. s How to cre eate 1-5 new IDs 1) Select 【Pro ogramming】--【Auto creatte(1-5)】.
TP PMS Tool Put 1-5 new sensorrs close to the top of the tool within 10cm. 2) 3) 3.4 Click 【OK】to program if new sensors are detected. o program other sensors. If programming succeeds, all IDs are listted. Click to Learning The e function is used u to write th he new sensor IDs into the car ECU.
TP PMS Tool 3.4.2 2 Self-Learning This learning wa ay is by driving g. For detailed learning step psand driving process, p ple ease refer to th he prompt on the t screen. 3.4.3 3 Copy Learning This way is by co opying the orig ginal sensor ID D to program the new senso or. The new w sensor ID iss the same as the original se ensor ID, so le earning is com mpleted afte er programing g.
TP PMS Tool 3.5 Read Sen nsorInformattion Selecct【Search】tto read the se ensor information. 3.6 Reference e for operation Selecct 【Referenc ce】 to get the e operation guider.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.