User's Manual

Operation Mode
This radio supports three operation Mode :DMR Trunking
mode,MPT Trunking mode and Conventional mode(Digital
and Analog).Switching Methods:
Product Information Display
Alert Tone
Press the Setting Key to access “Function Setting”- “Mode
Setting” and select a appropriate mode.
Note:To access Digital Conventional Mode and Analog
Conventional Mode to select Conventional Mode.
Time and Date Display Setting
You may achieve the following product information in this
interface : Product Name,Product ID,Series Number,Frequency
Range,Product Versions,Data Base Versions,Vocoder Versions,
Lastest Programming Date and ESN Code and so on.
Press Setting Key to access Product Information interface and
review all the information.
Use this function to modify this radio Date and Time.
Press “Setting”Key to access “Radio Setting”-“Date and
Time”interface to modify the Date and Time.
This function enable you set the following tones for your
radio:“Keypad Tone”, “Calling Tone”,“Called Tone”,
“Function Tone”,“Warning Tone”,“Low Battery Tone”and
Test Message Tone” Press “Setting”Key to access “Radio
Setting”-“Tone”.
Notes:The function tone is the alert tone of the
programmable Key function On/Off and Switching ,such
as High or Low power Switching and Zone Switching.
Vibration
Backlight
To set whether to enable the vibration function base on
user habit .To set this funcation via the CPS and Radio
Menu setting.
To set the backlight parameters of On/Off time,Off Type
and Brightness Value.
Press”Setting”key to access “Radio Setting”-“Display Setting” .
1 3
Product Function and Operations