User's Manual

Attaching the audio accessory/Programming Cable Attaching the Belt Clip
Before Use
1.Remove the screws from the back of radio.
2.Align the screw holes on the belt clip with those on the radio's
body ,and then tighten the screws.
1.Open the accessory jack cover as the arrow shown.
2.Align the plug with accessory jack.
3.Tighten the screw on the plug.
Note:
To remove the accessory ,loosen the screws.
10
Note:
To remove the belt clip,loosen the screws.
Caution:
When you are using an external accessory ,
Waterproof performance of the radio may get affected.