User's Manual

4
Selecting a Zone
A zone is a group of channels exhibiting the same property. The
radio supports 32 zones and each zone contains 128 channels
at most.
You can select a zone by pressing the programmed Zone Up or
Zone Down key, and you will hear the correspond warning tone
when switching to the zone.
Selecting a Channel
After turning the radio on, rotate the Channel Selector knob to
select a needed channel. You can also switch to the designated
channel by pressing the Preset Channel key.
If the Channel Notify function is active, you will hear the
corresponding channel number when switching to any channel.
Switching the Channel Mode
This radio can operate in either digital or analog conventional
mode.
Each channel can be programmed as either analog or digital
channel via the CPS. If the current zone includes a mixture of
analog and digital channels, you may quickly switch between
digital and analog through the Channel Selector knob.
Private Call
Call
A private call is a call form an individual radio to another
individual radio.
You can make a private call to the preset contact by pressing the
PTT key in standby status.
To ensure that your speech is clear, keep the microphone 2.5 to
5 cm from your mouth.
Note:
You may preset a contact for each digital channel.
The contact may be a private call contact, or group
call contact or all call contact.