User's Manual

Document Name：APN0000241_V0.4.1_UDM06XX_User Manual_Excelland Service Robot 20220906
Document Security Level: Level 2
Doc.#: #: APN0000241_V0.4.1_UDM06XX_User Manual_Excelland Service Robot 20220906
Page 19 of 22
This Record Storage Period: Permanent
Product Maintenance
3.4 Tray, drive wheel and auxiliary wheel
Keep the tray clean and tidy, check and clean it at least once a
week. Wipe it with a clean cotton cloth. When the bottom wheel is
tangled or bonded by sundries, please lift the robot to clean it.
3.5 Sensor Maintenance
Please check and clean the laser radar sensor at least once a
month. In case of sudden contamination, be sure to deal with it
immediately to avoid abnormal operation of the machine. Clean it
with soft paper towels or a clean cotton cloth.
3.6 Body Maintenance
Keep the body neat and clean by wiping it with a clean cotton
cloth. It is forbidden to lift, climb, bump, push or break off the
robot, nor to stack sundries on the body. If the machine breaks
down, it is forbidden to remove the screws or open the cover for
repair without our permission or guidance. It is forbidden to wash
the robot directly with water or to clean the robot with corrosive or
volatile chemical solvents. Otherwise, the appearance or internal
structure of the robot may be damaged and irreparable faults may
occur.
3.7 Maintenance of electrode slabs for charging pile and robot
Keep the electrode slabs for charging pile and robot dry and
clean, check and clean them at least once a week, wipe them with
soft paper towel or clean cotton cloth; in case of poor charging
contact, please clean them immediately.