User's Manual

Document Name：APN0000241_V0.4.1_UDM06XX_User Manual_Excelland Service Robot 20220906
Document Security Level: Level 2
Doc.#: #: APN0000241_V0.4.1_UDM06XX_User Manual_Excelland Service Robot 20220906
Page 17 of 22
This Record Storage Period: Permanent
7) The maximum permissible gradient of the robot is designed to
be 10°, but the recommended slope for carrying items should
be less than 5°, and the slope width should not be less than
the minimum passing width of 0.9m, and the rollover angle
should not exceed 5° to prevent items from spilling.
8) There should be a space of 70cm between two robots at the
standby point, a gap of 15cm from the back wall and a
distance of 35cm from the side wall.
9) Fences or other barriers should be installed at the edge of the
stairs, the entrance of the downhill and other places where
there is a risk of robot falling. If there is no protection
measure, customized laser stickers of our company should be
pasted to form a virtual wall to avoid robot falling.