User's Manual

Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc
Document Security Level: Level 2
Doc.#:
#: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc
Page 7 of 10
This Record Storage Period: Permanent
(2) Using two U-bolts and two toothed installation bracket to fix the reader on vertical rod
through the L-bracket, refer to Figure 3-2.
Note: This installation method is suitable for cross bars with a diameter of30mm～50mm.
Figure 3-2 Horizontal pole installation
3.1.3 Vertical Pole Installation
(1)Align the L-shaped mounting bracket against the screw poles on bottom of reader
housing, then install the rubber and screw the M6 nuts, refer to Figure 3-3:
Figure 3-3 L-shaped mounting bracket installation
(2)Using two U-bolts and two toothed installation bracket to fix the readeronverticalrod
through the L-bracket, refer to Figure 3-4.