User's Manual

Document Name: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc
Document Security Level: Level 2
Doc.#:
#: APN0000238_V0.3.1_UDE07XX_User Manual_Elevator Control System 20220728.doc
Page 3 of 10
This Record Storage Period: Permanent
Introduction of Elevator Control System
The elevator control system consists of five parts: main control box of elevator control
system, floor counting device of elevator control system, floor calibration device of
elevator control system, wireless transmitting and receiving device, and key expansion
device.
1 Control System of Elevator Taken by Robot
Mainly including robot, Cloud network management system, intelligent elevator IoT
module
Cloud network management system: It is mainly responsible for remote management of
each module. The robot and elevator IoT module should be connected to the cloud
network management system for data interaction. In addition to the maintenance of its
own operating logic, it receives the status data reported by each module, and issues the
corresponding control instructions according to the requirements.
Robot: As the main body to take the elevator, it shall determine whether to take the
elevator according to business requirements. In the process of taking the elevator, it
interacts with the cloud network management system and the elevator IoT module to
complete the operations of calling the elevator and entering and leaving the elevator.
Intelligent elevator IoT module: It communicates with the cloud network management
system, Lora module and robot through It is mainly responsible for calling elevator, floor
detection, opening and closing the door. When the robot takes the elevator, the intelligent
module interacts with the robot and the cloud network management system, reports the
elevator status in real time, and coordinates the robot to complete the elevator- riding
process.