User's Manual

 Do not use the device if it has fallen into water or any other fluid; if liquid has been spilled or if it has been
exposed to rain or moisture.
 WARNING! To reduce the risk of fire or electric shock, protect the device against dripping or splashing
water, and keep it away from objects filled with liquids. Such objects should not be placed on or near the
device.
 Do not use the device if there are visible signs of damage.
 Do not use the device if it has been dropped or does not operate normally.
 Do not attempt to disassemble or repair the device or modify it in any manner.
 Only allow repairs to be carried out by a qualified service centre. Qualified service centre: after-sales
department of the manufacturer or store, which is recognised and authorised to carry out such repairs,
so that potential hazards can be prevented. If problems are encountered with the device, please
return it to this department.
Electricity & heat
 Never leave the device to charge unattended.
 Regularly check the power cord for damage.
 Do not use the device if the power cord shows signs of damage.
 Make sure the power cord cannot be trodden on or pinched.
 Do not allow the power cord to hang over sharp edges and keep it away from hot objects and naked
flames.
 Do not use the device if it has a damaged power cord, if it has become faulty, or if it has fallen or
become damaged in any way. Send the device to the manufacturer or the closest qualified service
centre for inspection.
 Ensure that the device and power cord do not come into contact with heat sources, such as hotplates or
naked flames.
 To reduce or prevent the risk of personal injury, electrical shock, fire or damage to the device, never insert
metal objects in any opening of the USB charging port.
 WARNING! Do not open the casing as this may result in electric shock!
 Do not expose the device to excessive heat sources like fire or direct sunlight.
 Do not use or store the device in the immediate vicinity of heat sources such as naked flames.
 Do not crush, puncture or dismantle the device; this might damage the battery.
 WARNING! Damaging the casing and/or piercing the device, can lead to explosion or fire!
Cleaning:
 Before cleaning the device, always disconnect the device from the power cord.
 Do not use abrasive cleaning solvents to clean the device.
 Clean the exterior of the device with a damp cloth.
3) USING THE DEVICE
As a Sterilizer:
 It support sterilizing for Mobile phone (up to 6.5inch), Watch, Ornament, Makeup tools, etc.
 Put the device that needs to be sterilized into the sterilizer.
 When you open the lid of machine, it stops sterilizing automatically, and when you close the lid of
machine, it resumes working automatically.
 When sterilizing, LED C lights up in Light Blue and you will hear a beep; when finish, it turns off, and
you also will hear a beep.
 When sterilizing, LED D flashes Red, and you will hear a beep; when finish, it turns Green and you will
also hear a beep.
 Sterilizing time: 10 minutes.
As a Wireless Charger:
 Just put the mobile phone upon the lid of the machine, and it will start to charge automatically. When
charging, the LED E flashes Red, and when full charged, the LED lights up Green.
Note: Only the mobile phone which supports wireless charger can be used with this machine.