SMART LIGHTS USER MANUAL ■ Preparation 1 Wall plate with switch ◇ - Use a wall plate with switch no matter the wall plate is dimmable or not. - In case require to reset the lights, switch the lights on and off 5 times. - If the wall plate is dimmable, always set dimmer to maximum.
2.4 GHz Wi-Fi Router ◇ - Make sure the Wi-Fi network is 2.4 GHz. The Smart lights support 2.4GHz Wi-Fi only, not compatible to 5GHz. - Ensure the Wi-Fi router can support enough user number more than Smart Lights to be installed. - It is recommended to apply an enhanced antenna router or build a Wi-Fi router networks to ensure all rooms covered by strong Wi-Fi signal.
■ Get Started 1 □ Enable 2.4 GHz Wi-Fi and Bluetooth - For Android user, click the network detail to double check frequency is 2.4GHz. Ensure signal strength is excellent. - For iPhone user, please get into the Wi-Fi router setting page to check frequency. Active 2.4GHz frequency if it is inactive.
2 □ Mount Smart lights - Mount all smart lights onto ceiling 3 □ Configure Smart lights ❶ Download the Worth Cloud App Scan the QR code, or search ‘worth cloud’ APP in iOS store or Android APP market to download the APP.
❸ Drive the lights into pairing mode - Power on the lights, check whether they flash twice a second - If the lights is on but not flash, switch the wall plate 5 times to reset the lights. ❹ Add Devices Be sure to select a 2.
❺ Rename the Lights - For convenient to control, it is recommended to rename the lights and assign to each room accordingly.
❻ Create Group - If require to control some of the lights by groups, it is very easy to create groups on app.
■ Bind the lights to Amazon Echo ❶ Install Alexa APP on cell phone, register and sign in an amazon account. Then tap the hamberger menu to add the alexa echo step by step, till reported connection success.
❷ Bind Worth Cloud to Alexa There are two ways to bind worth cloud to Alexa. Approach 1: bind from worth cloud app. Click ‘me’ and then ‘third-party-voice service’ and then ‘alexa’ then done, very easy.
Approach 2: Bind from Alexa app Tap ‘skill & Games’, search ‘worth cloud’, enable it. ❸ Control Lights by group by voice Even though a group have been created on worth cloud app, i,e.
a same group on Alexa app to enable Alexa echo can recognize this group. Tap ‘device’ and then ‘+’ and then ‘ Add group’ to create a group on alexa app. ❹ Try voice commands: Alexa, turn on living room lights .
■ Bind the lights to Google Home Note: If several Google accounts have signed in Google Home app, only the first Google account can be used for “Home Control” ❶ Bind worth cloud to Google Home - Tap “Home Control” in the menu on Google Home app, tap “+” to add “worth cloud”, 12 |
❷ Assign Rooms - Type exact the same region, account and password of your worth cloud account, then tap “Link Now”. then assign room for worth cloud, worth cloud will be listed in the Home Control page.
❸ Try voice commands: - OK Google , turn on/ off bedroom light. - OK Google, set bedroom light to 50 percent. - OK Google, brighten / dim bedroom light. - OK Google, set bedroom light to green. ■ Troubleshooting ❶ Smart lights cannot be found by App - If the lights flash twice a second, it is in pairing mode, and the app can find the lights only when it is in pairing mode. If the lights not flash, switch them on / off 5 times, drive them into pairing mode.
❹ Amazon Echo/google home failed to recognize the smart lights Reset Amazon Echo/Google Home, the re-configuration can solve this failure in most case. ■ Customer Service Question, comment or feedback? We’d love to hear from you, contact us via: 🔗 Website: www.ephan.cn ✉ Technical Support: support@ephan.cn ✉ Purchase: sales@ephan.cn Information in this document is subject to change without notice. Copyright Ephan Technology Co.,Ltd 2022.
FCC STATEMENT Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
