Operating Description

7 Page / 16 Pages
removed, press any set of switches to remove the alarm, and the load power will be reduced to the rate
d power for normal use.
3. Dc discharge
1) Press the "POWER" button for 1S, and the screen lights up. Press the "USB" button to display USB on
the screen. Click the "DC" button to display DC on the screen. If a DC or USB function is not used, press
the button for 1 second to disable it.
2)QC3.0 port: it can charge devices that support fast charging.
3) Type-c port: it can support CHARGING of PD65W fast charging device.
4. Hertz conversion
When the AC is off, hold down the "POWER" button and the AC button for 3 seconds to automatically sw
itch to 50Hz or 60Hz. The normal factory setting is 60Hz for the Japanese/American and 50Hz for the Ch
inese/European.
5. Product standby and shutdown
1) When all output DC/AC/USB/ wireless charging is off, the display enters hibernation mode for 50 seco
nds, and automatically shuts down within 1 minute, or long press "POWER" to shut down.
2) If the output AC/DC/USB/ wireless charger are all turned on or one of them is turned on, the display
will enter hibernation mode within 50 seconds, and the display will enter the steady state and will not au
tomatically shut down.
Click the "POWER" button or the indicator button to turn on, and long press the "POWER" button for 3 s
econds to turn off.
五.Product Electrcal Performance Index& Specification
1.Battery Pack
No.
Item
Performance Index
Note
1
Cell Type
32700
LIFEPO
2
Single Cell Capacity
6700mAh
3
Battery Combination Mode
7P7S
7P 7S
4
Battery Rated Capacity
328300mAh
All battery pack capacity
5
Battery Rated Power
1050Wh
6
Battery Rated Voltage
22.4V
Declared voltage 3.2V