Service manual

www.enc.net.cn/en Tel/Fax:[phone] Detailed function description
92
OFF ON OFF keypad number provision
OFF ON ON
terminal UP/DOWN
adjusting provision
ON OFF OFF serial port provision
ON OFF ON VCI
ON ON OFF CCI
ON ON ON end PULSE provision
27: switch frequency to CCI. Frequency provision channel is switched to
CCI provision compulsorily when this function terminal is effective, frequency
provision channel come back to previous status when this function terminal is
ineffective.
28: command switched to terminal. Run command channel is switched to
terminal run command channel compulsorily when this function terminal is
effective.
29~31: terminal select run command channel
Table 6-7 Run command channel logic mode
Run command
channel selection
terminal 3
Run command
channel selection
terminal 2
Run command
channel selection
terminal 1
Run command channel
OFF OFF OFF hold run command channel
OFF OFF ON
keypad run command
channel
OFF ON OFF
end run command channel
(keypad STOP command
ineffective)
OFF ON ON
end run command channel
(keypad STOP command
effective)
ON OFF OFF
serial port run command
channel(keypad STOP
command ineffective)
ON OFF ON
serial port run command
channel(keypad STOP
command effective)
Can realize control command selection shown in Table 6-7 by ON/OFF
combination of run command channel selection terminal，For relation of terminal
switch and function code F0.00 setting, that is, latter effective.
32: swing frequency jump-in. When swing frequency start mode is manual
jump-in，swing frequency function effective if this terminal effective，see F6