Service manual

www.enc.net.cn/en Tel/Fax:[phone] Detailed function description
71
F2.18 Acce time 2 Range: 0.1－6000.0 20.0
F2.19 Dece time 2 Range: 0.1－6000.0 20.0
F2.20 Acce time 3 Range: 0.1－6000.0 20.0
F2.21 Dece time 3 Range: 0.1－6000.0 20.0
F2.22 Acce time 4 Range: 0.1－6000.0
20.0
F2.23 Dece time 4 Range: 0.1－6000.0 20.0
F2.24 Acce time 5 Range: 0.1－6000.0 20.0
F2.25 Dece time 5 Range: 0.1－6000.0 20.0
F2.26 Acce time 6 Range: 0.1－6000.0 20.0
F2.27 Dece time 6 Range: 0.1－6000.0 20.0
F2.28 Acce time 7 Range: 0.1－6000.0 20.0
F2.29 Dece time 7
Range: 0.1－6000.0 20.0
Can define 3 kinds of accelerating decelerating time and can choose
accelerating decelerating time 1～7 during inverter run process by different
combination of control terminal，please see definition for function of accelerating
decelerating time terminal in F5.00～F5.07.
F2.30
Multi-step freq. 1
(Speed tracking
initial frequency）
Range: Lower limit freq.－
upper limit freq.
5.00Hz
F2.31 Multi-step freq. 2
Range: Lower limit freq.－
u
pp
er limit fre
q
.
10.00Hz
F2.32 Multi-step freq. 3
Range: Lower limit freq.－
u
pp
er limit fre
q
.
20.00Hz
F2.33 Multi-step freq. 4
Range: Lower limit freq.－
u
pp
er limit fre
q
.
30.00Hz
F2.34 Multi-step freq. 5
Range: Lower limit freq.－
u
pp
er limit fre
q
.
40.00Hz
F2.35 Multi-step freq. 6
Range: Lower limit freq.－
u
pp
er limit fre
q
.
45.00Hz
F2.36
Multi-step freq. 7
Range: Lower limit freq.－
u
pp
er limit fre
q
.
50.00Hz
These set frequency will be used in multi-step speed run mode and simple PLC
run mode，please refer to multi-step speed run terminal function of F5.00～F5.07
and F4 group simple PLC function.
Accelerating decelerating time 1 is defined in F0.08 and F0.09.
note